“Each CubeSat was activated for about an hour in turn, in live sessions with the ground to perform commissioning – what we call ‘are you alive?’ and ‘stowed checkout’  tests,” explains ESA’s Hera CubeSats Engineer Franco Perez Lissi.

“The pair are currently stowed within their Deep Space Deployers, but we were able to activate every onboard system in turn, including their platform avionics, instruments and the inter-satellite links they will use to talk  to Hera, as well as spinning up and down their reaction wheels which will be employed for attitude control.”

Launched on 7 October, Hera is ESA’s first planetary defence mission, headed to the first Solar System body to have had its orbit shifted by human action: the Dimorphos asteroid, which was impacted by NASA’s DART spacecraft in 2022.

Travelling with Hera are two shoebox-sized ‘CubeSats’ built up from standardised 10-cm boxes. These miniature spacecraft will fly closer to the asteroid than their mothership, taking additional risks to acquire valuable bonus data.

Juventas, produced for ESA by GOMspace in Luxembourg will make the first radar probe within an asteroid, while Milani, produced for ESA by Tyvak International in Italy, will perform multispectral mineral prospecting.

The commissioning took place from ESA’s ESOC mission control centre in Darmstadt in Germany, linked in turn to ESEC, the European Space Security and Education Centre, at Redu in Belgium. This site hosts Hera’s CubeSat Mission Operations Centre, from where the CubeSats will be overseen once they are flying freely in space.

Juventas was activated on 17 October, at 4 million km away from Earth, while Milani followed on 24 October, nearly twice as far at 7.9 million km away.

The distances involved meant the team had to put up with tense waits for signals to pass between Earth and deep space, involving a 32.6 second round-trip delay for Juventas and a 52 second round-trip delay for Milani.

“During this CubeSat commissioning, we have not only confirmed the CubeSat instruments and systems work as planned but also validated the entire ground command infrastructure,” explains Sylvain Lodiot, Hera Operations Manager.

“This involves a complex setup where data are received here at the Hera Missions Operations Centre at ESOC but telemetry also goes to the CMOC at Redu, overseen by a Spacebel team, passed in turn to the CubeSat Mission Control Centres of the respective companies, to be checked in real time. Verification of this arrangement is good preparation for the free-flying operational phase once Hera reaches Dimorphos.”

Andrea Zanotti, Milani’s Lead Software Engineer at Tyvak, adds: “Milani didn’t experience any computer resets or out of limits currents or voltages, despite its deep space environment which involves increased exposure to cosmic rays. The same is true of Juventas.”

Camiel Plevier, Juventas’s Lead Software Engineer at GomSpace, notes: “More than a week after launch, with ‘fridge’ temperatures of around 5°C in the Deep Space Deployers, the batteries of both CubeSats maintained a proper high state of charge. And it was nice to see how the checkout activity inside the CubeSats consistently warmed the temperature sensors throughout the CubeSats and the Deep Space Deployers.”

The CubeSats will stay within their Deployers until the mission reaches Dimorphos towards the end of 2026, when they will be deployed at very low velocity of just a few centimetres per second. Any faster and – in the ultra-low gravitational field of the Great Pyramid-sized asteroid – they might risk being lost in space.

Franco adds: “This commissioning is a significant achievement for ESA and our industrial partners, involving many different interfaces that all had to work as planned: all the centres on Earth, then also on the Hera side, including the dedicated Life Support Interface Boards that connects the main spacecraft with the Deployers and CubeSats.

“The concept that a spacecraft can work with smaller companion spacecraft aboard them has been successfully demonstrated, which is going to be followed by more missions in the future, starting with ESA’s Ramses mission for planetary defence and then the Comet Interceptor spacecraft.”

From this point, the CubeSats will be switched on every two months during Hera’s cruise phase, to undergo routine operations such as checkouts, battery conditioning and software updates.

Quelle: ESA